Python git clone invalid syntax

Resolving Syntax Error When Using Git Clone Code

Inquiry: What is the error message for the third scenario? As per my understanding, the git clone command over SSH or HTTPS is more confined than other protocols. Therefore, it should be executed before the command. Here is your command: NOTE: If you are using Anaconda Navigator or Google Colab. Resolution 2: The reason behind this is that you cannot utilize the git clone command in IDLE.

How to solve syntax error with git clone code?

As a novice in Python, I am encountering difficulties when executing the given instruction.

git clone https://github.com/marksgraham/OCT-Converter.git 

The link provided directs to the OCT Converter repository on GitHub, which is maintained by marksgraham.

After installing Python 3.7.4 on my Mac, I attempted to run it on IDLE. However, an error message appeared stating «SyntaxError: invalid syntax» in relation to the word «clone». Is it necessary for me to install additional components before I can use this?

To execute the command, simply add an exclamation mark ‘!’ at the beginning.

Your command would be like,

!git clone https://github.com/marksgraham/OCT-Converter.git 

If you are utilizing Anaconda Navigator or Google Colab, please take note.

Due to the limitations of IDLE, the usage of git clone is not possible. To clone a git repository, navigate to the desired location in a terminal and execute the following command: git clone https://github.com/marksgraham/OCT-Converter.git . If errors persist, consider using install git , or utilize the provided installer for Mac systems.

Github, Just added an edit. I tried both of those to no avail. All the files throwing errors are empty and don’t have an extension. Not sure if that could be the cause I definitely think it is a file issue, because linux/windows have

Clone is invalid syntax, downloading github projects

I attempted to download sherlock-project from github via this link: https://github.com/sherlock-project/sherlock. The instructions on the page advised me to enter the following code in console: git clone https://github.com/sherlock-project/sherlock.git . However, when I tried to do so, I encountered an issue as seen here: https://prnt.sc/vmtfj5. Despite having git downloaded (https://prnt.sc/vmtgel), I am still unable to clone the repository. Is there a solution to this problem?

Just a heads up, this is my first time working with Python, so please don’t expect any brilliance from me. I appreciate you taking the time to help me out though.

To execute Git clone , it should be called from the command line instead of inside Python. If currently inside python, press , exit using ctrl+D or call exit() before calling git clone command .

Github — git clone command is not working?, Finally, don’t forget to try and clone through ssh if https does not want to work: see «Set up SSH for Git», and git clone git@bitbucket.org:user/repo.git. Share Follow answered Dec 17, 2016 at 14:36 VonC VonC 1.1m 484 484 gold

Invalid authentification with git clone

I am attempting to duplicate a private repo that is not present on my github account but is accessible to me. The commands I have executed are:

 git clone https://username:passwordgit@github.com/path/to/repo.git git clone https://username:password@github.com/path/to/repo.git 

If I encounter an invalid username or password, but in the event that I.

git clone https://github.com/path/to/repo.git 

When the identical username and password are used, it operates effectively. What is the accurate syntax?

git clone https://username:password@github.com/path/to/repo.git 

The syntax is accurate, but it’s possible that you’re inputting incorrect credentials. You can consult this related question for assistance.

Git clone failure with «—stdin requires a git repository, @RT. Another guess — you have configured a template directory — either with git config init.templateDir or git clone —template or you have git config core.hooksPath — and there is a bug in post-checkout hook.

Why git clone git:// is not working

// This works git clone https://github.com/foreverjs/forever.git // This one also works git clone git@github.com:foreverjs/forever.git // This one didn't work git clone git://github.com/foreverjs/forever.git 

The error message associated with the third one is:

Cloning into 'forever'. Permission denied (publickey). fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. 

To my knowledge, the use of Git Clone via SSH or HTTPS is more limited compared to the git:// protocol. It is perplexing to receive an error message when git:// protocol does not even mandate authentication.

Did I miss something, or is GitHub currently restricted to only allowing Git clone via SSH or HTTPS?

I came across an issue that was caused by the gitconfig file in my computer. Upon investigation of the ~/.gitconfig file, I discovered two lines that were responsible.

By eliminating these two lines, the git:// protocol won’t encounter permission problems while operating through SSH.

It works for me just fine:

$ git clone git://github.com/foreverjs/forever.git Cloning into 'forever'. remote: Counting objects: 3258, done. remote: Total 3258 (delta 0), reused 0 (delta 0), pack-reused 3258 Receiving objects: 100% (3258/3258), 782.12 KiB | 0 bytes/s, done. Resolving deltas: 100% (1341/1341), done. Checking connectivity. done. 

Is your public key configured correctly?

However, the manual page specifies that git:// follows a distinct protocol.

• Using git: , users can communicate anonymously with git protocol via a direct TCP connection or a configured proxy.

The lack of encryption makes it insecure, therefore it is not advisable to utilize.

Did I miss something, or is GitHub exclusively supporting Git clone over SSH or HTTPS now?

When connecting to GitHub, it’s recommended to use SSH or HTTPS since the Internet connection is usually insecure, unless you’re in their data-center which is unlikely. If you trust your intranet or local network, the git protocol may be useful. Additionally, keep in mind that.

During pushes, the URL «git://example.org/path/to/repo.git» gets transformed into «ssh://example.org/path/to/repo.git», while for pulls the original URL remains the same.

I encountered a similar issue where the console kept printing endlessly while using Git Bash.

I eradicated all Git associated records in the windows credential manager and my .gitconfig, then employed the clone feature of Github Desktop.

I reset my credentials (consisting of my username and developer token) within Github Desktop, which resolved the issue.

Error when running install and import from Github, SyntaxError: invalid syntax How can I import the module from this package python github package google-colaboratory Share Follow edited Feb 9, 2021 at 7:09 MSS asked Feb 9, 2021 at 6:34

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

SyntaxError: invalid syntax #212

SyntaxError: invalid syntax #212

Comments

I get this error when running Sherlock:

python3 sherlock.py neilbreen -r --print-found File "sherlock.py", line 78 Fore.GREEN + f"] " + ^ SyntaxError: invalid syntax 

This applies to Python2, Python3, with/without arguments and sudo

The text was updated successfully, but these errors were encountered:

Like the readme says, you have to have Python 3.6 or above.

This does keep happening. I wonder if it is possible to have an explicit check about the Python version, and give an error message that the user is using the wrong version? I see a StackOverflow description on how to do this.

I’m having the same issue and I have python 3.6.9 installed and it’s the same output when I try to run any command with sherlock

File «sherlock.py», line 78 Fore.GREEN + f»] » + ^ SyntaxError: invalid syntax

Use: python3 sherlock.py —help and so on to work with it.

@AlberickRL Can you run Python with the —version option? For example, if the command you use to invoke Python is «python3», then execute «python3 —version». I expect that you are running a different version than you expect.

Hi, I’m having problems installing the repo for Sherlock it’s giving a syntax error. I’ve got python 3 installed but yet it’s giving an error.

The solution for me was as follows:
sudo apt install python 3.6

Then when running sherlock use this command format:
python3.6 sherlock.py —help

That should fix it for you even if you have a different version of python 3 as your default. This also prevents other programs that are dependent on a different version of python3 from being impacted.

I am having an issue stating Import csv has a syntax error.

File «sherlock.py», line 10
Import csv
^
SyntaxError: invalid syntax

NM figured out the Import csv issue.

But I now have this error.

Traceback (most recent call last):
File «sherlock.py», line 22, in
from colorama import Fore, Style, init
ImportError: No module named ‘colorama’

The solution for me was as follows:
sudo apt install python 3.6

Then when running sherlock use this command format:
python3.6 sherlock.py —help

That should fix it for you even if you have a different version of python 3 as your default. This also prevents other programs that are dependent on a different version of python3 from being impacted.

I tried this, but now i get this error
Traceback (most recent call last): File «sherlock.py», line 22, in from colorama import Fore, Style, init ModuleNotFoundError: No module named ‘colorama’

Use: python3 sherlock.py —help and so on to work with it.

same error
File «sherlock.py», line 78 Fore.GREEN + f»] » + ^ SyntaxError: invalid syntax

@AlberickRL can you check the version that you have use python3 -V

hi, I’m still having problems running this command. it’s not recognising the clone command it’s saying syntax error.

You are trying to clone the repository inside of the Python interpreter. Git is not built into Python. You need to open up a regular shell.

Do you have Git installed on your computer?

@hoadlck I have Git installed on my computer and that command ran through nicely on the Git shell. Thank you. I have another problem with the third command it’s saying the command is not found.

I think that you are copying part of the prompt text from an example. The text that you should type in is
pip3 install -r requirements.txt

@hoadlck It seems not to recognise the command it’s saying the command is not found. What am I doing wrong?

This has to do with your install of Python. It may be that your PATH is not setup properly.

It sounds like some people have had issues with pip not being installed by default. Look at this
Installing PIP entry on StackOverflow.

If this is just a PATH issue, look in the «Scripts» directory where you have Python installed. If you do see pip or pip3 installed in there, then you can pass the entire path to get to pip. Because people often have multiple installs of Python on their machines, an individual distribution is not added to the PATH.

Источник