Openssl php install composer

How to enable PHP’s openssl extension to install Composer?

It is possible that WAMP and Composer are using different PHP installations. Composer will use the PHP set in the PATH environment variable.

If you want to enable the openssl extension to install Composer, first you need to check the location of the PHP installation.

1. Open a Command Prompt, type: echo %PATH% then check for the location of your PHP installation.
2. Go to that location and edit the file named: php.ini .
3. Uncomment the line extension=php_openssl.dll by removing the semicolon at the beginning.

Now you are good to install Composer.

Solution 2

I solved my problem a different way. The problem is that wamp’s GUI was misleading: it claimed that I had php_openssl enabled.. and if I clicked on php.ini on the same GUI.. it actually showed that extension=php_openssl.dll was uncommented..

I’m not sure if i’m using the same installer version of composer of the OP, but it actually asks you at the beginning to specify the php.exe that you like to apply composer on (which basically ensures that no one tries to apply composer to the wrong php executable as what happened with the OP)..

The way I solved this was by going myself into the installation of php within the wamp package: C:\wamp\bin\php\php5.4.12 and looking php.in there.. when I opened it I was shocked that the line extension=php_openssl.dll was actually commented! I uncommented it and it worked just fine.

Solution 3

I had the same problem and here the solution I found, on your php.ini you need to do some changes:

Every one here talks active the openssl extension, but in windows you need to active the extension dir too.

Solution 4

For WAMP server, comment given by «Enrique» solved my problem.

wamp is using this php.ini:

c:\wamp\bin\apache\Apache2.4.4\bin\php.ini 

But composer is using PHP from CLI, and hence it’s reading this file:

c:\wamp\bin\php\php5.4.12\php.ini (so you need to enable openssl there) 

For composer you will have to enable extension in

Solution 5

If you’re doing this on Windows without one of the WAMP stacks, here’s how to get this going

1. Download an installation of PHP for Windows. Generally you’ll want a non-thread safe install. You can use 32-bit or 64-bit builds
2. Extract the zip file somewhere. I would suggest C:\php . Composer’s installer found it there without any additional prompting
3. The latest versions of PHP for Windows do not come with a php.ini by default. Instead, you’ll see two files, as noted below. Rename one to php.ini or copy it into php.ini .
   • php.ini-development
   • php.ini-production
4. Open your php.ini file and remove the semicolon from this line (you might want to uncomment other things as well but this line is the only one necessary for Composer)

That should be all you need to do. The Composer installer should do everything else you need from here.

Источник

How to enable PHP’s openssl extension to install Composer ?

To perform the secure HTTPS transfers you will need to enable the openssl extension then you have to install the composer. In this article, we will cover the enabling openssl for XAMPP as well as WAMP one by one then we will install the composer.

• Enable openssl extension on XAMPP
• Enable openssl extension on WAMP
• Installation of Composer

Enable PHP’s openssl extension on XAMPP:

• Step 1: Open XAMPP control panel and click on the Config button for the Apache module.
• Step 2: Then from the given options, select PHP (php.ini) option. This will open the php.ini file in the default text editor (example: notepad).
  
• Step 3: Now we have to search for extension=openssl line in that file.
• Step 4: After you find it, see if there is any semicolon ‘;’ at the beginning of the line. If there is then that means it is disabled. So remove the semicolon to enable the extension.
  
• Step 5: Save and Close the file. And there you have openssl extension enabled.

Enable PHP’s openssl extension on WAMP:

• Step 1: Run the WAMP Server installed on the system.
• Step 2: Now Left Click on the Green WAMP icon on the bottom right corner in windows and go in PHP option.
  
• Step 3: Then go to the PHP extensions option and there you will find the openssl option. If there is a green tick mark at the beginning of it then it means it is enabled. If not then you can enable it by clicking it.
  
• Step 4: Now restart all the services and you have enabled openssl extension.

Note: You can also enable openssl on WAMP by going in the php.ini file.

Install Composer: After following the above steps for enabling the openssl, you can follow the following steps to install Composer

• Step 1: Download the Composer-Setup.exe file and run it.
• Step 2: After running, you will see a popup box asking for the install mode. Here select Install for all users, which is also a recommended option, and hit Yes.
  
• Step 3: In Installation Options window, we don’t want the Developer mode, so we will let it be unpicked and click on Next.
  
• Step 4: Now, you will have to choose the PHP command-line. For XAMPP, the path will be C:\xampp\php\php.exe and for WAMP, the path will be C:\wamp64\bin\php\php7.3.12\php.exe and click Next. If you don’t find the path in the drop down then you will have to browse it. The version of PHP can be different for you.
  If don’t have installed Visual C++ Redistributable for Visual Studio then it will show you below error. So to proceed you have to install that first.
  
• Step 5: Now in the Proxy Setting, leave every thing as it is and click on Next.
  
• Step 6: Now, verify the settings and click on Install.
  
• Step 7: Now you will see the following windows which means that the Composer is installed. Click on Next and hit Finish.
  
• Step 8: Now, to check if composer installed properly, open cmd, and type composer and hit Enter. If you see the output as below then it is successfully installed. If not then you will have to restart your PC and try again.
  

Источник

Enabling Composer Installation: A Guide to Activating PHP’s OpenSSL Extension

Solution 1: There may be a discrepancy between PHP’s performance within an HTTP server and on the command line. In each instance, a distinct configuration is employed, so it’s possible that the SSL extension is not properly configured for the command line version. You can confirm this by examining the phpinfo output on the command line. Solution 2: If you’re experiencing issues with extensions such as php_openssl.dll, you can either adjust the path in the configuration file or copy the specific file from the php/ext directory to the php directory. In your particular case, this would be c:\php\ext. Solution: I was able to resolve the problem by compiling PHP with the —with-openssl flag.

How to enable PHP’s openssl extension to install Composer?

There is a chance that WAMP and Composer are utilizing separate PHP setups, with Composer relying on the PHP configured in the PATH system variable.

Prior to installing Composer with the openssl extension, it is important to verify the location of the PHP installation.

1. Access the Command Prompt and enter the following code: echo %PATH% . Proceed to verify the location of your PHP installation.
2. Navigate to the designated spot and modify the file identified as php.ini .
3. To activate the code, eliminate the semicolon at the start of the commented line, which reads extension=php_openssl.dll .

You are now ready to proceed with the installation of Composer.

I resolved my issue using an alternative method. The problem arose from wamp’s GUI, which provided misleading information. It indicated that php_openssl was enabled, but upon clicking on php.ini , it revealed that extension=php_openssl.dll was uncommented instead.

It’s uncertain whether or not the installer version of Composer being used is the same as the OP’s. However, at the start of the installation process, you are prompted to specify the php.exe that you want to apply Composer to. This is a precaution to prevent Composer from being applied to the incorrect PHP executable, as was the case with the OP.

To resolve the issue, I delved into the installation of php in the wamp package, specifically in \ \ \ \ \ C:\wamp\bin\php\php5\.4\.12\ \ \ \ . Upon inspection of php.in , I was surprised to find that the line extension=php_openssl.dll was commented out. I simply uncommented it and the problem was resolved.

I encountered a similar issue and discovered a solution. The solution involves making adjustments to the php.ini file.

The OpenSSL extension is frequently discussed, however, it is important to note that in Windows, the extension directory also needs to be activated.

Php — Installing Composer OpenSSL Issue, Some settings on your machine make Composer unable to work properly. Make sure that you fix the issues listed below and run this script again: The openssl extension is missing, which means that secure HTTPS transfers are impossible. If possible you should enable it or recompile php with —with-openssl.

PHP & Composer: The openssl extension is required for

The openssl extension is required for SSL / TLS protection but is not available.# extension = openssl #Shorts

Composer installation : The openssl extension is missing

Installer composer automatiquement et résoudre l’erreur The openssl extension is missingMusique fin : http:// www.youtube.com /user/sapientkillshttps://soundcl

OpenSSL error with Composer PHP package manager

The way PHP works inside a HTTP server is different from how it works on command line. In each case, there is a unique configuration, which means that there is a possibility that the SSL extension has not been configured for your command line version.

Verify OpenSSL presence in the phpinfo output on command line using php -i .

As you perform the task, make sure to utilize the identical output, identify the data that pertains to the implementation of php.ini , and include the OpenSSL extension.

Since limited information was provided, I am assuming that your system setup is comparable to mine, which involves Windows XP and WAMP. While this solution should be effective for Unix, I cannot confirm it as I do not have the means to verify.

Despite having PHP running on WAMP and correctly configuring the ini-files, I encountered the same error as you. However, after some investigation and extensive experimentation, I discovered that the command line version of PHP did not utilize the ini-files. Once I realized this, I was able to successfully launch composer by setting the ini-file through a specific command.

In brief, give this command a shot, php -c /path/to/ini/file composer install , and check if it functions.

During the installation of Composer, I encountered an issue which I resolved by following these steps. Firstly, I saved the php file to c:\php and opened the php.ini file to enable the extension =php_openssl.dll by eliminating the semi colon, but it didn’t work. I then discovered the extension openssl.dll in the sub directory named ext and transferred it to the c:\php directory. This worked instantly, which was a relief as it had been quite troublesome. I’m happy to have moved on from this issue.

Composer installation : The openssl extension is missing, Installer composer automatiquement et résoudre l’erreur The openssl extension is missingMusique fin : http:// www.youtube.com /user/sapientkillshttps://soundcl

Installing Composer OpenSSL Issue

Be sure to remove the comment from this line in your php.ini file if you use Windows.

PHP’s extension is ensured to be taken from its ext library.

If you’re looking for extensions such as php_openssl.dll, they may be located in the php/ext/ directory. To access them, you can adjust the path in the configuration file or move the file itself from the php/ext directory to the php directory.

in your case it will be c:\php\ext

The openssl extension is required for SSL/TLS when, >scoop install php composer >composer selfupdate composer: 1.6.5 (latest version) [Composer\Exception\NoSslException] The openssl extension is required for SSL/TLS protection but is not available. If you can not enable the openssl extension, you can disable this error, at your own risk, by setting the …

Composer gives openssl error message php7 on linux

I have recently built PHP by adding the —with-openssl flag.

Composer not working on windows, gives, [Composer\Exception\NoSslException] The openssl extension is required for SSL/TLS protection but is not availab le. If you can not enable the openssl extension, you can disable this error , at your own risk, by setting the ‘disable-tls’ option to true. Command doesn’t matteri it gives above error with all commands

Источник