Функция пропустить в php

Операторы break и continue в PHP

Очень часто при работе с циклами требуется пропустить одну итерацию и перейти к следующей. Не менее часто возникает необходимость и вовсе нужно прервать цикл ещё до того, как он должен был завершиться. Для этого используются специальные операторы PHP – continue (переход к следующей итерации) и break (остановка цикла).

Оператор break завершает цикл полностью, continue просто сокращает текущую итерацию и переходит к следующей итерации:

while ($foo) < continue; --- возвращаемся сюда --┘ break; ----- покидаем цикл ----┐ > | 

Прерывание цикла - break

Для примера напишем простейший цикл, внутри которого мы будем выяснять, есть ли искомое число в массиве, или нет:

Пример

 $array = [5, 9, 6, 7, 33, 2, 48, 7, 18, 17];

$number = 7;
$isNumberFound = false;
foreach ($array as $value) echo 'Сравниваем с числом значение ' . $value . '
';
if ($item === $number) $isNumberFound = true;
>
>

echo $isNumberFound ? 'Число найдено' : 'Число не найдено';
?>

Результат выполнения кода:

Сравниваем с числом значение 5 Сравниваем с числом значение 9 Сравниваем с числом значение 6 Сравниваем с числом значение 7 Сравниваем с числом значение 33 Сравниваем с числом значение 2 Сравниваем с числом значение 48 Сравниваем с числом значение 7 Сравниваем с числом значение 18 Сравниваем с числом значение 17 Число не найдено

Перед циклом мы инициализировали переменную $isNumberFound , назначение которой — хранить информацию о том, найдена ли искомая цифра в массиве или нет. Изначально приравниваем её к false .

В цикле идём по массиву и сравниваем каждый его элемент $value с числом. Когда совпадение найдено значение переменной $isNumberFound станет равной true и мы уже знаем, что искомая цифра в массиве есть.

Из примера видно, что все элементы массива сравнивались с искомой цифрой. А что если мы хотим найти цифру 7 и на этом завершить работу цикла? Для этого используем оператор break :

Пример

 $array = [5, 9, 6, 7, 33, 2, 48, 7, 18, 17];

$number = 7;
$isNumberFound = false;
foreach ($array as $value) echo 'Сравниваем с числом значение ' . $value . '
';
if ($item === $number) $isNumberFound = true;
break;
>
>

echo $isNumberFound ? 'Число найдено' : 'Число не найдено';
?>

Результат выполнения кода:

Сравниваем с числом значение 5 Сравниваем с числом значение 9 Сравниваем с числом значение 6 Сравниваем с числом значение 7 Число найдено

В примере мы останавливаем работу цикла, как только искомая цифра 7 найдена. При этом сценарий завершился с гораздо меньшим числом итераций.

Прерывание итерации - continue

Оператор continue предназначен для остановки обработки текущего блока кода в теле цикла и перехода к следующей итерации. В отличие от break он не прерывает работу цикла, а всего лишь выполняет переход к следующей итерации.

В следующем примере пропускается значение 3 цикла for:

Пример

 for ($x = 0; $x < 10; $x++) if ($x == 3) continue; 
>
echo "Число: $x
";
>
?>

Результат выполнения кода:

Операторы break и continue применяются в циклах for, foreach, while, do-while или switch

Источник

Функция пропустить в php

continue is used within looping structures to skip the rest of the current loop iteration and continue execution at the condition evaluation and then the beginning of the next iteration.

Note: In PHP the switch statement is considered a looping structure for the purposes of continue . continue behaves like break (when no arguments are passed) but will raise a warning as this is likely to be a mistake. If a switch is inside a loop, continue 2 will continue with the next iteration of the outer loop.

continue accepts an optional numeric argument which tells it how many levels of enclosing loops it should skip to the end of. The default value is 1 , thus skipping to the end of the current loop.

$i = 0 ;
while ( $i ++ < 5 ) echo "Outer
\n" ;
while ( 1 ) echo "Middle
\n" ;
while ( 1 ) echo "Inner
\n" ;
continue 3 ;
>
echo "This never gets output.
\n" ;
>
echo "Neither does this.
\n" ;
>
?>

Omitting the semicolon after continue can lead to confusion. Here's an example of what you shouldn't do.

One can expect the result to be:

Changelog for continue

Version Description
7.3.0 continue within a switch that is attempting to act like a break statement for the switch will trigger an E_WARNING .

User Contributed Notes 20 notes

The remark "in PHP the switch statement is considered a looping structure for the purposes of continue" near the top of this page threw me off, so I experimented a little using the following code to figure out what the exact semantics of continue inside a switch is:

for( $i = 0 ; $i < 3 ; ++ $i )
echo ' [' , $i , '] ' ;
switch( $i )
case 0 : echo 'zero' ; break;
case 1 : echo 'one' ; XXXX ;
case 2 : echo 'two' ; break;
>
echo ' ' ;
>

- continue 1
- continue 2
- break 1
- break 2

and observed the different results. This made me come up with the following one-liner that describes the difference between break and continue:

continue resumes execution just before the closing curly bracket ( > ), and break resumes execution just after the closing curly bracket.

Corollary: since a switch is not (really) a looping structure, resuming execution just before a switch's closing curly bracket has the same effect as using a break statement. In the case of (for, while, do-while) loops, resuming execution just prior their closing curly brackets means that a new iteration is started --which is of course very unlike the behavior of a break statement.

In the one-liner above I ignored the existence of parameters to break/continue, but the one-liner is also valid when parameters are supplied.

Источник

PHP: break, continue и goto

Часто бывает удобно при возникновении некоторых условий иметь возможность досрочно завершить цикл. Такую возможность предоставляет оператор break . Он работает с такими конструкциями как: while, do while, for, foreach или switch .

Оператор break может принимать необязательный числовой аргумент, который сообщает ему, выполнение какого количества вложенных структур необходимо завершить. Значением числового аргумента по умолчанию является 1, при котором завершается выполнение текущего цикла. Если в цикле используется оператор switch , то break/break 1 выходит только из конструкции switch .

\n"; break 1; /* Выход только из конструкции switch. */ case 10: echo "Итерация 10; выходим
\n"; break 2; /* Выход из конструкции switch и из цикла while. */ > > // другой пример for ($bar1 = -4; $bar1 < 7; $bar1++) < // проверка деления на ноль if ($bar1 == 0) < echo 'Выполнение остановлено: деление на ноль невозможно.'; break; >echo "50/$bar1 = ",50/$bar1,"
"; > ?>

Разумеется, иногда вы предпочли бы просто пропустить одну из итераций цикла, а не завершать полностью работу цикла, в таком случае это делается с помощью оператора continue .

continue

Для остановки обработки текущего блока кода в теле цикла и перехода к следующей итерации можно использовать оператор continue . От оператора break он отличается тем, что не прекращает работу цикла, а просто выполняет переход к следующей итерации.

Оператор continue также как и break может принимать необязательный числовой аргумент, который указывает на скольких уровнях вложенных циклов будет пропущена оставшаяся часть итерации. Значением числового аргумента по умолчанию является 1, при которой пропускается только оставшаяся часть текущего цикла.

"; continue; > echo "50/$bar1 = ",50/$bar1,"
"; > ?>

Обратите внимание: в процессе работы цикла было пропущено нулевое значение переменной $counter , но цикл продолжил работу со следующего значения.

goto

goto является оператором безусловного перехода. Он используется для перехода в другой участок кода программы. Место, куда необходимо перейти в программе указывается с помощью метки (простого идентификатора), за которой ставится двоеточие. Для перехода, после оператора goto ставится желаемая метка.

Простой пример использования оператора goto :

Оператор goto имеет некоторые ограничение на использование. Целевая метка должна находиться в том же файле и в том же контексте, это означает, что вы не можете переходить за границы функции или метода, а так же не можете перейти внутрь одной из них. Также нельзя перейти внутрь любого цикла или оператора switch . Но его можно использовать для выхода из этих конструкций (из циклов и оператора switch ). Обычно оператор goto используется вместо многоуровневых break .

"; > echo 'после цикла - до метки'; // инструкция не будет выполнена end: echo 'После метки'; ?>

Копирование материалов с данного сайта возможно только с разрешения администрации сайта
и при указании прямой активной ссылки на источник.
2011 – 2023 © puzzleweb.ru

Источник

PHP Break and Continue

You have already seen the break statement used in an earlier chapter of this tutorial. It was used to "jump out" of a switch statement.

The break statement can also be used to jump out of a loop.

This example jumps out of the loop when x is equal to 4:

Example

PHP Continue

The continue statement breaks one iteration (in the loop), if a specified condition occurs, and continues with the next iteration in the loop.

This example skips the value of 4:

Example

Break and Continue in While Loop

You can also use break and continue in while loops:

Break Example

Continue Example

Unlock Full Access 50% off

COLOR PICKER

colorpicker

Join our Bootcamp!

Report Error

If you want to report an error, or if you want to make a suggestion, do not hesitate to send us an e-mail:

Thank You For Helping Us!

Your message has been sent to W3Schools.

Top Tutorials
Top References
Top Examples
Get Certified

W3Schools is optimized for learning and training. Examples might be simplified to improve reading and learning. Tutorials, references, and examples are constantly reviewed to avoid errors, but we cannot warrant full correctness of all content. While using W3Schools, you agree to have read and accepted our terms of use, cookie and privacy policy.

Источник

PHP continue

Summary: in this tutorial, you will learn to use the PHP continue statement to skip the current iteration and start the next one.

Introduction to the PHP continue statement

The continue statement is used within a loop structure such as for , do. while , and while loop. The continue statement allows you to immediately skip all the statements that follow it and start the next iteration from the beginning.

Like the break statement, the continue statement also accepts an optional number that specifies the number of levels of enclosing loops it will skip.

If you don’t specify the number that follows the continue keyword, it defaults to 1. In this case, the continue statement only skips to the end of the current iteration.

Typically, you use the continue statement with the if statement that specifies the condition for skipping the current iteration.

PHP continue example

The following example illustrates how to use the continue statement inside a for loop:

 for ($i = 0; $i < 10; $i++) < if ($i % 2 === 0) < continue; > echo "$i\n"; > Code language: HTML, XML (xml)
  • First, use a for loop to iterate from 0 to 9.
  • Second, skip the current echo statement if $i is an even number. The $i is an even number when the $i % 2 returns 0. As a result, the output shows only the odd numbers.

Summary

  • Use the continue statement to skip all the statements that follow it and start the next iteration from the beginning.

Источник

Читайте также:  Warning lf will be replaced by crlf in css style css
Оцените статью